SR Electrical Services LTD attended the Ulverston Depot due to a breakdown with the sites tank gauging system.
After further investigation, it was determined that the existing tank gauging system was obsolete; meaning we were unable to source replacement parts for the system.
Due to this, our team designed and measured the existing tank to allow for probes to be made to the site's perisic tank's diameter size and product type. We have now installed 3 number Veeder Root Magflex Probes, and 3 number Mag1 probes onsite. We have also installed a new Veeder Root Approved blue IS cable tray.
SR Electrical have supplied and installed a TLS450 PLUS unit onsite, with a remote DISS 200 unit for drivers' access and to provide off-loading facility checking for Bridger drivers. As well as these areas of work, we have also supplied and installed an overfill protection sounder / beacons in various locations onsite.
Certas Energy have allowed SR Electrical Services to install our remote cloud monitoring equipment into the tank gauging system to allow for wet stock management and maintenance to be carried out when the site's gauge is in operation.
Gallery
Tank Gauging System
Veeder Root Magflex Probes
Control Panel
Electrical Maintenance Service
Ulverston Depot Inspection
Latest News
View all
Explosion-proof Lighting: Advice for UK Businesses
Explosion-proof lighting is often referred to as hazardous area lighting or hazardous location lighting, and it encompasses lighting which is designed to contain sparks to prevent them from causing fires and explosions.
Read more about Explosion-proof Lighting: Advice for UK Businesses
Share
Hazardous Area Inspections 101: What You Need to Know
The simple definition of a hazardous area is ‘an environment in which there are flammable gases, vapours, dusts or fibres present which create or may create an explosive atmosphere’.
Read more about Hazardous Area Inspections 101: What You Need to Know
Share
Latest Projects
View all
Hazardous Area Lighting For A Hydrogen Dispensing Area
We were contacted to supply and install zone 1 hazardous area lighting to our clients’ hydrogen dispensing area.
Read more about Hazardous Area Lighting For A Hydrogen Dispensing Area
Waste Management Plant Room ATEX Lighting
For a client with a waste management plant room, we supplied and installed zone 1 ATEX certified lighting as well as emergency lighting controls via ATEX certified motion sensor controllers.
